tarm 12

The tarm 12 show laser projector is a pure diode solution with analog color modulation and a guaranteed output power of 11'300 mW.

The tarm 12 (ShowNET) units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, automatic mode.
The tarm 12 (ShowNET) comes with integrated ShowNET network interface and free laser show software. Details in the box below.

11'300 mW guaranteed output power
a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
high-precision diode arrays provide an excellent beam divergence of less than 0.9 mrad for a low beam diameter
pure diode laser
novel method for increasing the power density of the red laser beam
beautiful colors and great color fading
the tarm 12 impresses with a very bright 637 nm red with 3.6 W power for an improved white balance
Trim pots for adjusting color intensity
MANUFACTURED IN GERMANY, with high precision diodes array modules

The projector has good specifications with a beam diameter of ca. 4.5 mm and a beam divergence of less than 0.9 mrad (full angle). It is equipped with a red (3'600 mW / 637 nm), a green (2'900 mW / 520 nm), and a blue (5'500 mW / 450 nm) diode laser source.

The tarm 12 devices have very fast scanners, running at 45 kpps@8° ILDA and scanning a maximum scan angle of 50°, upgrades to CT-scanners with 60 kpps@8° ILDA and a deflection angle of up to 60° are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

This show laser light has a switchable scan safety and switches for x-axis and y-axis flip. Color intensity can be adjusted with trim pots per color channel.

The housing of the tarm 12 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 12 is suitable for demanding show laser applications and graphics projections in clubs, bars and on medium-sized stages and can be used by beginners as well as professionals.

+ Integrated ShowNET incl. free laser show software

The tarm 12 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 11 (ShowNET) for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

Hardware features of integrated ShowNET:

X/Y scanner outputs with 12 bit resolution (4096 different positions on each axis)

Color outputs with 8 bit resolution (256 different intensity values per color channel): red, green, blue, intensity linked to green

DMX512 input and output (non-isolated)

100 Mbit Ethernet port

Flexible IP address setting: static address, DHCP or AutoIP

Internal MicroSD card for ILDA file playback (ILDA format code 4/5 RGB), can be accessed via LAN

standalone operation and DMX IN/OUT via DMX-Adapter

Maximum scan speed ~100.000 points per second

Up to 16 devices can be used in parallel for multiprojector laser shows

Built-in ArtNet-to-DMX converter

メーカー:
Tarm
保証出力(光学部品通過後):
11'300 mW
レッド出力:
3'600 mW / 637 nm
グリーン出力:
2'900 mW / 520 nm
ブルー出力:
5'500 mW / 450 nm
レーザークラス:
4
ビーム仕様 (フルアングル):
ca. 4.5 mm / < 0.9 mrad
スキャナ:
45 kpps ILDA 8°
optional CT-6210H with LAS Turboscan: 60 kpps ILDA 8°; max. 60°.
スキャン アングル:
max. 50°
レーザーソース:
Diode
操作モード:
ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave; integrated intelligent ShowNET laser mainboard with display
optional: Pangolin FB4
アクセサリー:
power cable, manual, key, interlock connector, full version Showeditor software license included
電源:
85 V - 250 V / AC
消費電力:
280 W
寸法:
320/260/140 mm
製品重量:
12.5 kg
ユーザーマニュアル:
ユーザーマニュアル tarm 12