RTI NANO RGB 50 OPSL

The RTI NANO RGB 50 OPSL has a guaranteed output power of 45'000 mW full-color RGB and an incredible white balance. The benefits include:

• 45'000 mW guaranteed output power after optics
• despite the high power it is possible to reach a maximum scan speed of 45kpps@8° ILDA. High speed scanner upgrade with CT-6215HP is also available.
• a low divergence upgrade is available too: with the EMS-9000 scanners, the beam size grows to 10mm, but divergence reduces for perfect long distance projections.
• high-precision diode arrays (red, blue) provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter! (With the LD-upgrade divergence: <0.5mrad)
• green Coherent Taipan OPSL module, which stand out due to beam precision
• an extremely high output power with a balanced power distribution: 12'000mW / 638nm red, 20'000mW / 530nm green, 8'000mW / 462nm cyan, and 12'500mW / 450nm blue.
• new technology for increasing the beam precision of the single-mode diodes
• brilliant colors and great color fading
• the RTI NANO RGB 50 OPSL impresses with a very bright 638 nm red
• newly developed electronics with calibration capability via a browser interface
• emergency stop signal can be looped through several RTI NANO systems, which means that one emergency stop is sufficient for all devices
• quality product, made in Germany
• Robust and dustproof housing, which also makes it possible to use it outdoors without problems

The RTI NANO RGB 50 OPSL is equipped with laser diode modules and green OPSL module with a very homogenous and balanced setup. The special modules ensure brilliant colors, a homogeneous white and great color mixture. The 638 nm light red sources ensure a very good visibility of the red color spectrum. The high-precision diode arrays emit with very small beam diameters and at the same time have an excellent divergence of less than 1.0 mrad (or even <0.5mrad with the special low divergence optics). The beam precision of the single-mode diodes was significantly increased by new methods of beam shaping. The diode laser modules are manufactured by Ray Technologies in Germany.

The green Coherent Taipan OPSL module stand out due to beam precision.

The RTI NANO RGB 50 OPSL is equipped with high-speed scanners, that make the unit perfect for high professional and demanding applications.

By default, the RTI NANO RGB 50 OPSL is controlled via ILDA and is equipped with advanced electronics that allow for laser calibration via browser interface. The browser interface works with PC, MAC, Linux, tablet, mobile phone, etc., so the on-site calibration of this laser system is easy and does not require any physical access to the laser after set up any more. It connects via LAN (WIFI is also possible with a suitable access point) and contains calibration options or color balance, scanning position, safety features etc. 
Optionally the system can also be supplied with an embedded FB4 (LAN, DMX, SD card operating modes). An external remote control pad is available on request. There is an 'ILDA-IN' interface as well as an 'ILDA-Through' on the back of the device to daisy-chain the control signal. The emergency stop / interlock signal can also be daisy chained for several RTI NANO laser systems, which means that only one emergency stop is sufficient for all RTI NANO devices connected to one another.

 
Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The powerful RTI NANO RGB 50 OPSL is suitable for indoor and outdoor show laser applications at concerts, festivals and other major events. Demanding graphics projections or projections over long distances are possible without any problems.

The RTI NANO RGB 50 OPSL is a quality product manufactured in Germany.