Laserworld PL-5500RGB Outdoor

The Laserworld PL-5500RGB Outdoor is especially designed for the use as projection laser in an ourdoor environment for fixed installations. It is equipped with reliable diode laser technology and fast scanners for clear logo and pattern projections.
The housing of the PL-5500RGB Outdoor is rain proof and makes this laser well suitable for architecture projections, laser mappings or logo displays.
The built-in Pangolin FB4 interface can be pre-programmed for stand alone operation, but it is also possible to live-control the lasers system. It is easy to add own logos, texts or graphics. The show laser light system is completely equipped with diode laser sources and has a good white balance, with linear color fading behaviour and high visibility.

Advantages of the Laserworld PL-5500RGB Outdoor are:

• great for logo projections or use for architectural illumination
• can be used as stand-alone device or with direct control
• brilliant colors with great linear color fading behavior
• easy to operate, Pangolin control software included
• including Safety Unit

The Laserworld PL-5500RGB Outdoor has a beam diameter of about 5.0 mm and beam divergence of ca. 1.1 mrad.
Guaranteed output power at aperture is 5'500 mW. 1'100 mW / 638 nm (red), 1'600 mW / 520 nm (green), 3'000 mW / 450 nm (blue).
Fast scanners work at a speed of 35 kpps@8° ILDA and can do a max. scan angle of 50°.

The complete projector is built rain proof and is cooled through the external cooling fins (bottom part). Thus the maintenance effort is kept very low.
The show laser has an internal PSU for easy handling.
The configuration of the essential parameters can be done via the built-in Pangolin FB4 interface.
A Safety Unit is included in delivery.

Operating temperature: -5°C to +40°C